We can know from the production process of alloy steel shot that it has better performance, which usually depends on the quality of the product itself. When it comes to quality, we should not only pay attention to the methods used in the production process, but also to the methods used in the usage process. After long-term use, if not maintained in a timely manner, it is likely to rust, which has a significant impact on our use. Now, let's learn about the rust removal method of alloy steel shot together.
1. The sandblasting rust removal system mainly composed of alloy steel shot as the main material consists of compressed air and auxiliary tanks, spray guns, iron ball recovery devices, and ventilation and dust removal equipment.
2. When in use, compressed air enters the air distribution tank after oil-water separation, with a portion entering the shot blasting drum and a portion passing through a filter for the operator to breathe.
3. Driven by compressed air, the steel sand in the alloy steel shot blasting cylinder enters the spray gun through a conduit and is sprayed onto the surface of the workpiece from the nozzle.
4. The ejected pellets fall into the shot pit through the sieve and are recycled before being input into the shot blasting cylinder for reuse.
5. The dusty dust sprayed out by the alloy steel shot rust removal equipment is sucked into the dust removal equipment by the fan and discharged into the atmosphere.
If rust occurs, we need to adopt the correct solution, and then we need to strictly follow the steps in the operation process.
The application of alloy steel shot in the casting industry and the pretreatment of steel plates are widely used in the casting industry. After the workpiece is taken out of the mold, the sand on the surface of the workpiece is removed by it. When used with suitable equipment, due to its durability, it is an abrasive with good surface cleaning.
The manufacturing process of alloy steel shot is as follows: first, the steel block is melted, and then high-pressure water is sprayed onto the molten steel to form small particles. The formed pellets are reheated and purified uniformly, and then quenched. After quenching, the pellets are dried, reheated, and tempered in the melting furnace to achieve the applicable hardness. The tempered alloy steel balls are mechanically screened into different grades and other products. Products with different particle sizes and hardness are used for different processes, such as surface strengthening.

That's all for the rust removal method of alloy steel shot today. I hope the above content can be helpful to everyone. Due to its bright and rust free appearance, this product is widely used for surface spraying treatment of high hardness workpieces such as automotive springs, suspension springs, quenched gears, screws, chains, various stamped parts, standard parts, stainless steel, etc.
Editor: Chihiro